Lessons Learned About Houses

Crown Moulding, a Way to Decorate Your Home or Office Crown moulding is described as an ornamental piece of wood, metal or plaster that serves to decorate or outline an area in your office or home. The exterior or interior areas of your home or office can be decorated with this material. Mouldings are installed to frame the walls, ceilings, windows, and door openings of your home or offices. Crown mouldings can add elegance to any room with the decorative design from the wall to ceiling. Look at the importance of crown moulding to your choice of framing an expensive work of art. It is advisable that you choose your crown moulding in harmony with the concept of your home interiors. Be wary not to make the crown moulding too big or too small or too simple in comparison to the interior of the room so as not to cheapen the look of the room. Some homeowners would go for custom made crown moulding to settle the look of their interiors and personal style. Crown moulding is generally installed along the seams where the wall meets the ceiling in a room.
9 Lessons Learned: Homes
Your home or office will have an increased value, glamour and beauty if you install crown moulding.
Learning The Secrets About Homes
There are some guidelines to follow before a crown moulding is installed. The first preparation is by locating all the studs in your walls and ceiling joist. You can locate this by making some pencil marks lightly on the point where you see the moulding up as you nail it. Figuring out which way the ceiling joists are running is your next preparation. In a square room, this preparation is important because you have only the nailers for the top of your trim on two of the four walls. Using a framing square is another easy way to find the size of the triangle nailer. You can still work effectively even if the nailer does not perfectly fit. Another tip is not to force the nailer to the moulding that in effect will not sit flush against the wall and ceiling, and do this by leaving a little room. Another preparation is the installation of the nailers on the walls excluding ceiling nailers. By holding the nailer against the wall and ceiling, you can pre-drill the nailer with the use of a counter sink drill bit into the studs on the walls. Then, attach to the stud using a 3 inches coarse thread drywall screw. Your next preparation is to have a reference line on the wall at the height you want the crown moulding would sit on the wall. You can do this by taking a piece of scrap moulding, place it against a wall, and then marking it with pencil at the bottom of the moulding.